Polymer-silicate premium paint is intended for use for indoor applications as a protective and decorative coating.
Terrix® IP-ST-P paint is based on innovative Swiss technology combining silicate and dispersion binding agents and offers unique properties not available to any other paints on the market.
The high alkalinity (PH Levels) of the product delivers natural and long-lasting protection against algae and black mould growth. Due to its vapour permeable characteristic, it allows walls to receive and give off moisture naturally, therefore the excess of moisture in the air can be easily reduced, ideal for use in wet rooms such as kitchens, bathrooms, laundry rooms and basements.
This paint has a very high resistance to wet scrubbing and washing and can be applied on all wall, ceiling and wood surfaces.
Terrix mould resistant paint is ideal for new build properties in all areas and restoration or simply as a recoating paint for decorative surfaces.
Benefits to the customer
Click below to expand:
No flaking or cracking
Terrix® IP-ST-P paints bond to the substrate by chemical reaction. Traditional paints create a film on top of a substrate which can lead to peeling or cracking.
Very high resistance to wet scrubbing and washing
The product exceeds Category I (BS-EN-13300) requirements and it is suitable for use in heavy traffic areas.
Very high resistance to dirt
Not achievable by organic based paints on the market (all emulsions including acrylic, latex and silicon) it is due to its mineral formulation therefore lack of surface electrostatics. The dust wont’t be attracted to the paint.
Flame retardancy
Due to the lack of organic components in the paint and pigments used for colouring. In contrast to most paints on the market and all standard emulsion paints, Terrix® IP-ST-P provides protection against the spread of flame. Mineral characteristic of the paint makes it fully incombustible.
Very high resistance to yellowing
Built in UV blockers to maintain original look of paint.
Black mould and algae resistance
Increased Ph level (high alkalinity) delivers natural and long lasting protection. Terrix® IP-ST-P paints do not contain any Biocide (which are not recommended for internal use).
Suitability for swimming pools and high moisture environments
Due to its high permeable characteristics and chemical bonding to the substrate.
No mist coat or priming required
Sprayable directly onto plaster due to its chemical bonding properties. Two coats of paint only required.
Deep, quality matt appearance
Smooth, velvety finish that does not reflect light and provides a luxury appearance. The deep matt finish can also mask any wall imperfections.
Natural regulation of moisture levels
Due to microporous structure enabling the "free" travel of moisture and use of hydroscopic proprieties of the wall. Lower moisture levels means less expensive heating and lower risk of development of any asthmatic health conditions.
Benefits to the applicator
Up to 10 times faster than traditional application.
Even on substrateswith high levels of moisture content, due to chemical bonding and full vapour permeability.
The product consistency and formulationallows for simple snagging without need to repaint entire wall.
Due to thepolymer-silicate prosperities of the product, it is fully vapour permeable and therefore the paint can be used for difficult applications like old damp buildings or new builds where walls and renders are still wet and use of standard paints would require minimum 30 days of curing.
As matt surfaces are not reflecting light it is much easier to use the product on non perfect walls orceilings.
Less wastage and mess - the high viscosity of the paint makes it painter a friendly product and highly suitable for ceilings application.
Smaller material usage and less time required. The product is partly absorbed by the substrate and then chemical reaction is developed.
Second coat can be applied almost immediately.
Spray Plaster and paint VINCI
Terrix® IP-ST-P
